Avanti cantilever

This configuration of the Avanti system is used when recessing the rail into the face of the wall and is usually specified at the design stage by an Architect. This being said it is sometimes possible to retrofit this rail to a plasterboard wall as the rail is the same thickness as the plasterboard making it relatively straight forward to cut a channel, to do this you will need to know what you are doing and we encourage you to call us for some advice prior to making an attempt.

The rail itself is rated at 30kg per lineal metre when installed properly using the supplied fixing screws. The holes in the rail are precisely countersunk and colour-matched screw-caps pop on the screws to conceal them.

Each hanger is made in our workshop and with precise machinery to ensure the highest quality finish. The system is available in two standard finishes; powder coated 'Architectural white' or clear anodised (silver) both of these finishes are at the top of scale for quality and durability.

To successfully hang art using the Avanti system, each complete order requires:

  • A RAIL - to mount to your wall or surface
  • RAIL ACCESSORIES to conceal the exposed ends of the rail
  • At least two HANGERS - which descend from the rail, and
  • At least two HOOKS per picture - these attach to the hanger and enable your pictures to be adjusted to the desired height
  • A FRAME KIT - if D-rings are not present on the back of a picture, this gives the hook a solid fixing to the frame

More pictures can be mounted by simply adding more hooks to the same hangers. For more detailed info:



Rails:




Rail Accessories:




Hangers:




Hooks:




Accessories:




45 Item(s)

per page